|
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Single Axis - 120 VAC Single Phase | ||||
| Part No. | Torque Stall/Rated/Peak (lb-in) | Max Speed (RPM) | Flange/ Face | Horsepower @ 2000 RPM |
| 3100-2000 | 21 / 17.3 / 68 | 3600 | NEMA 56C | 0.57 |
| 3100-2001 | 39 / 31 / 118 | 3600 | NEMA 56C | 1.04 |
| 3100-2002 | 54 / 47 / 110 | 3600 | NEMA 56C | 1.54 |
| 3100-2003 | 54 / 50 / 167 | 2000 | NEMA 56C | 1.54 |
| 3100-2004 | 68 / 60 / 215 | 2000 | NEMA 56C | 1.85 |
| Single Axis - 230 VAC Three Phase | ||||
| Part No. | Torque Stall/Rated/Peak (lb-in) | Max Speed (RPM) | Flange/ Face | Horsepower @ 2000 RPM |
| 3100-2006 | 54 / 45 / 167 | 3600 | NEMA 56C | 1.54 |
| 3100-2008 | 68 / 56 / 215 | 3600 | NEMA 56C | 1.85 |
| 3100-2009 | 97 / 89 / 215 | 2000 | NEMA 143TC | 2.73 |
| 3100-2010 | 146 / 133 / 470 | 2000 | NEMA 143TC | 4.10 |
| 3100-2011 | 195 / 165 / 494 | 2000 | NEMA 143TC | 5.46 |
FEATURES
Kits work perfectly with CONTREX controllers
Sinusoidal commutation for ultra smooth operation at low speeds
Operate in current (torque) or velocity (RPM) modes
Complete optical isolation between signal and power stage
- Brushless design is quieter and requires less maintenance
OPTIONS
Standard cable lengths are 10 foot- other lengths available upon request
Standard encoder PPR is 1024 - consult factory for other options
REPLACEMENT PARTS
Amplifiers
CXB1525-0984C12-1A-1-00 (5220-1490) Single Axis Stand Alone Amplifier; 15A cont.; 25A peak; 120VAC Single Phase
CXB1525-1984C12-1A-1-03 (5220-1496) Single Axis Stand Alone Amplifier; 10A cont.; 25A peak; 230VAC Three Phase
CXB2040-1984C12-1A-1-03 (5220-1497) Single Axis Stand Alone Amplifier; 15A cont.; 35A peak; 230VAC Three Phase
Consult the factory for replacement or spare motors and cables
RELATED PRODUCTS
M-TRACK ... for Synchronizing Two Machines (Electronic Lineshaft)
M-ROTARY ... for Synchronizing Rotary Knife Applications with Electronic Cam Action
M-SHUTTLE ... for Synchronized, Shuttle-type Flying Cut-Off Applications
M-TRAVERSE ... for Reciprocating (Back-and-Forth) Motion such as Level Wind Applications
M-CUT ... for Indexing Applications such as Cut-to-Length and Registration Cuts
CX-1010 ... for Precision Speed & Speed Ratio (Electronic Gearing) Applications
CX-1102 ... for Unwind/Rewind and Dancer Controlled Web Applications
CX-1200 ... for Synchronizing Two Machines (Electronic Lineshaft) & Registering Webs
Servo Kits
Servo Kits
CXB Amplifier Operation and Service Manual (909KB PDF)
Go to top