The ML-Drive provides precision speed control to standalone (Master) or multi-motor (Follower) motion control applications. Using advanced digital feedback techniques, the ML-Drive can increase speed precision to within 0.01% of set speed in Master mode applications. When configured as a Follower in multi-motor systems, the ML-Drive provides speed ratio setpoint entry and control to within four digits of resolution. Embedded scaling algorithms permit setpoint (set speed) entry and tach monitoring in engineering units specific to your application.
 |
|
The ML-Drive is housed in a ¼ DIN vertical instrument enclosure with embedded operator
interface. The integrated display and keypad panel gains access to numerous control and monitor
parameters. Individual application requirements are met by simply accessing the relevant code
parameter and then entering the appropriate numerical value. Because the ML-Drive is pre-
programmed, applications can be commissioned in a matter of minutes once the drive
has been installed. A full compliment of monitor parameters are available to verify operation and
assist with diagnostics.
The ML-Drive control has a serial port for RS485 communication. ContrexHost software, when
installed on a Windows PC or laptop, allows you to initiate commands, change parameters, load/save setup values,
and monitor more than 50 values on one or up to 32 channels of ML-Series controls.
Features:
Pre-programmed control algorithms for Master and Follower control.
Up to two Master and two Follower preset setpoints with on-the-fly digital input reconfiguration.
The precision lead and feedback frequency inputs utilize either open-collector encoder or proximity sensors.
Two programmable digital outputs are provided for drive status and alarm functions.
Many of these documents are in Adobe Acrobat PDF format. You will need the Adobe Acrobat Reader, available free from Adobe , to view or print these documents.
Copyright © 2002-2006 CONTREX, INC. All rights reserved.